Designing your home’s exterior can completely change the aesthetic of your home, whether that be retiling your roof, jet washing the bricks or repainting your wall panels. Working on the outside of the home requires more safety precautions than the inside, as it will involve working at heights a lot more often. Rather than climbing a ladder, which gives you minimal support and high risk of falling, there’s powered access hire machinery that can help improve the safety of it.
This guide will give you more information about the different powered access machines you can use to streamline your home exterior work, so you can reduce the chance of things going wrong. Continue reading to find out more.
The Best Powered Access for Home Exteriors
Scissor Lifts
Scissor lift hire is one of the fastest growing parts of the powered access industry with more project managers using it to allow their engineers to reach heights safely. It offers a secure work platform with guardrails, significantly minimising the risk of falls compared to standing on a narrow rung. This is perfect when you’re wanting to upgrade your roof with new tiles, as you’ll be able to get up and down much easier. The platforms are designed to hold the worker plus necessary tools and materials, so everything you need can be taken up there.
Telescopic Boom Lifts
This is a platform mounted on a hydraulic arm that can extend outward and over obstacles. Articulating booms have joints, while telescopic booms are straight and are more catered for homeowners who want to design their home exterior. There’s also Super MEWPs hire that allows you to reach higher parts of a building, perfect for apartment blocks.
Vertical Mast Lifts
Vertical mast lifts are very lightweight lifts where the platform is supported by a single vertical mast. They are often used for lower-height exterior work where the working area is confined, such as tight side yards or small patios. They are easier to maneuver through standard gates, so they will fit into your backyard while minimising lawn damage.
Why Powered Access is Safer
Strict safety protocols are mandatory for all powered access equipment. Before operating, always perform a level surface check to ensure stability using the machine’s indicator and maintain a 10-foot minimum distance from all power lines to prevent electrocution. Follow tie-off rules too. While some lifts are flexible, boom lifts always require a harness and lanyard secured to an anchor point to operate properly with less risk, so always make sure this is attached with no wear and tear. Finally, never use a lift without proper operator training and certification.
Conclusion
When designing the outside of your home, such as the walls or roof, you should always get the help of powered access equipment. It’s much safer than using ladders or scaffolding, as well as being more efficient due to less lead times. Always hire these machines too, as purchasing them will be far more expensive.
